4-5-6-7-8 Reverse Clutch Piston Installation

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 4-5-6-7-8 Reverse Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
CAUTION: Refer to Seal Reuse Caution .
1	4-5-6-7-8 Reverse Clutch Piston Seal
2	4-5-6-7-8 Reverse Clutch Piston Stop NOTE: Note the orientation of the stop.
3	4-5-6-7-8 Reverse Clutch Piston
4	4-5-6-7-8 Reverse Clutch Piston Return Spring NOTE: Note the orientation of the spring.
5	4-5-6-7-8 Reverse Clutch Piston Dam Seal
6	4-5-6-7-8 Reverse Clutch Piston Dam
7	4-5-6-7-8 Reverse Clutch Piston Dam Retaining Ring NOTE: Install a NEW retaining ring, it is not reusable. The points on the retaining ring should face up. It may be helpful to loosely install the retaining ring before installing the tool. Special Tools DT-35512 Bearing Installer DT-50900 Clutch Travel Support Fixture DT-50902 Adjustable Clutch Spring Compressor For equivalent regional tools, refer to Special Tools .