M17 Liftgate Motor Assembly X2 (TB5)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-2 (GY) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | J-35616-34 (YE) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| III | Not Required | J-35616-4A (PU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 1 1.5 |
WH/BK BU/GY BN/WH |
6126 5791 5799 |
Lift Gate Object Sensor 2 Signal Lift Gate Cinch Latch Motor Close Control Lift Gate Open/Close Motor Close Control |
II III I |
TB5 TB5 TB5 |
| 2 | 1 1.5 |
BN WH |
5790 5798 |
Lift Gate Cinch Latch Motor Open Control Lift Gate Open/Close Motor Open Control |
III I |
TB5 TB5 |
| 3 | 2.5 | RD/GN | 1540 | Battery Positive Voltage | III | TB5 |
| 4 | 1 | RD/BU | 840 | Battery Positive Voltage | III | TB5 |
| 5 | - | - | - | Not Occupied | - | - |
| 6 | 3 | BK | 1350 | Ground | III | TB5 |