Circuit/System Verification

Verify that the brake fluid level is above the minimum level.
- If low
  Refer to Brake Fluid Loss .
- Go to next step: If above minimum level
Ignition ON.
Verify the scan tool Brake Fluid Level Sensor parameter is OK.
- If the parameter is Low
  Refer to Circuit/System Testing
- Go to next step: If the parameter is Ok
Verify the brake warning indicator turns ON and OFF when commanding the Instrument Cluster All Indicators On and Off with a scan tool.
- If the brake warning indicator does not turn ON and OFF
  Replace the P16 Instrument Cluster.
- Go to next step: If the brake warning indicator turns ON and OFF
All OK.