LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls And Fuel - 2.5L (LCV) - Diagnostic Information And Procedures (P0351 - P2635)) >> Diagnostic Information And Procedures >> DTC P129E Or P12A8: Fuel Pump >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • DTC P129E and P12A8 are informational DTCs.
  • Diagnose all other engine control module DTCs prior to DTC P129E or P12A8.
  1. Verify that no other DTCs are set except for DTC P129E or P12A8.
    • Go to next step: If only DTC P129E or P12A8 is set 
  2. Replace the K111 Fuel Pump Power Control Module.
  3. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
    • If DTC sets 

      Replace the K20 Engine Control Module.

    • Go to next step: If DTC does not set 
  4. All OK.