LEMON Manuals
: Even more car manuals for everyone
Home
>>
GMC
>>
2018
>>
Acadia Denali, FWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 8 (Engine Controls And Fuel - 2.5L (LCV) - Diagnostic Information And Procedures (P0351 - P2635))
>>
Diagnostic Information And Procedures
>>
DTC P0650, P263A, Or P263B: Malfunction Indicator Lamp (MIL) Control Circuit
>>
Conditions for Running the DTC
Conditions for Running the DTC
WARNING:
This page is about a different variant/trim than selected.
The engine speed is greater than 80 RPM.
The ignition voltage is between 11 - 32 V.
The DTC runs continuously when the above conditions are met.