Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Drain the engine oil. Engine Oil and Oil Filter Replacement
- Oil Pump Flow Control Valve Heat Shield - Remove - Oil Pump Flow Control Valve Heat Shield Replacement
- Engine Front Cover - Remove - Engine Front Cover Replacement
- Exhaust Front Pipe - Remove - Exhaust Front Pipe Replacement (LCV)
Catalytic Converter Brace Bolt (1) - Remove (Qty: 2)
- Catalytic Converter Brace (2) - Remove
Air Conditioning Compressor Bolt (1) - Remove
- Front Cradle Brace - Remove - Front Cradle Brace Replacement
- Power Transfer Unit Case - Remove - Power Transfer Unit Case Replacement
Oil Pan Bolt (1) - Remove
Oil Pan Bolt (1) - Remove
Disconnect the oil level switch connector (1).
Remove the long oil pan bolts (3), medium bolt (2) and short bolts (1), then remove the oil pan.
- For part transfer, cleaning and inspection, refer to Oil Pan Cleaning and Inspection .