Lower Oil Pan Replacement (AWD)

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Procedure Engine Oil and Oil Filter Replacement
1	Oil Pan Fastener (Qty: 5) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Oil Pan Cover Apply a 2.25 mm bead of sealer on the level part of the flange around the perimeter of the oil pan cover. Adhesives, Fluids, Lubricants, and Sealers . NOTE: The lower crankcase surface must be free of contamination prior to applying the sealer. The oil pan must be fastened to final torque specification within 60 minutes of applying the sealer.