Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Install the oil pump. Balancer Shaft with Oil Pump Assemble
Courtesy of GENERAL MOTORS COMPANY

Balancer Shaft with Oil Pump (2) - Install
Balancer Shaft with Oil Pump Bolt (1) - Loosely install (Qty: 8)
Fig 1: Balancer Shaft With Oil Pump Bolt Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Balancer Shaft with Oil Pump Bolt - Tighten in sequence (Qty: 8)

Tighten
1. First pass 58 N.m (43 lb ft)
2. Final pass 58 N.m (43 lb ft)
Timing Chain Crankshaft Sprocket Replacement - Install
Oil Pan Replacement (2WD) Oil Pan Replacement (AWD) - Install