LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4364101

    Install the transmission range selector cable bracket (2).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission range selector cable bracket bolts (1) and tighten to 25 N.m (18 lb ft).
  3. GM4363825

    Connect the range selector cable (2) to the range selector cable bracket.

  4. Connect the range selector cable end (1) to the range selector lever.
  5. Check the range selector cable adjustment. Range Selector Lever Cable Adjustment 
scientia non olet · About LEMON Manuals