Output Speed Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the control solenoid valve and transmission control module assembly. Refer to Control Valve Body Replacement . |
|
| 1 | Output Speed Sensor Bolt M6 x 18
CAUTION:
Refer to Fastener Caution . Procedure Tighten in specified sequence. Tighten 9 N.m (80 lb in) |
| 2 | Output Speed Sensor Procedure Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn . |