LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
  2. GM1998829

    Disconnect the input speed sensor electrical connector (1).

  3. GM1998841

    Remove the input speed sensor bolt (2) M6 x 23.

  4. Remove the input speed sensor (3).
  5. Remove the 3 input speed sensor seals (1).
scientia non olet · About LEMON Manuals