LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Auxiliary Fluid Accumulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM3683546

    Install the NEW auxiliary fluid accumulator bypass valve seal (7) to the auxiliary fluid accumulator (6).

  2. Position the auxiliary fluid accumulator (6) to the transmission.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the auxiliary fluid accumulator bolts (5) and tighten to 22 N.m (16 lb ft).
  4. Connect the auxiliary fluid accumulator solenoid electrical connector (4).
  5. Install the NEW auxiliary fluid accumulator pipe seals (3) to the accumulator pipe (2).
  6. Install the auxiliary fluid accumulator pipe.
  7. Install the auxiliary fluid accumulator pipe bolts (1) and tighten to 22 N.m (16 lb ft).
  8. Connect the range selector cable to the range selector lever. Range Selector Lever Cable Replacement 
  9. Install the battery tray. Battery Tray Replacement
  10. Release the park brake and remove the chock from the wheels.
scientia non olet · About LEMON Manuals