Torque Converter Fluid Seal Replacement

WARNING: This page is about a different variant/trim than selected.

Callout	Component Name
1	Torque Converter Fluid Seal Retainer
2	Torque Converter Fluid Seal NOTE: For Gen 2 transmissions use DT-47791-B Seal Installer. For Gen 3 transmissions use J-29162 Seal Installer. Special Tools DT-47791-B Seal Installer DT-6125-B Slide Hammer EN-23129 Universal Seal Remover J-29162 Seal Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Torque Converter Fluid Seal Retainer

Torque Converter Fluid Seal

NOTE:

For Gen 2 transmissions use DT-47791-B Seal Installer. For Gen 3 transmissions use J-29162 Seal Installer.

Special Tools

For equivalent regional tools, refer to Special Tools .