Input And Output Speed Sensor Removal
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | A/Trans Output Speed Sensor Bolt M6 x 18 (Qty: 1) |
| 2 | A/Trans Output Speed Sensor Assembly |
| 3 | Input Speed Sensor Bolt M6 x 23 (Qty: 1) |
| 4 | Input Speed Sensor Assembly
NOTE:
Compress the locking tabs on the plug to release it from the case and to avoid damaging the retainers. |
| 5 | Input Speed Sensor Assembly Seals (Qty: 3)
NOTE:
Discard the seals. They are not reusable. |