LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 3-5-Reverse And 4-5-6 Clutch Housing Disassemble >> Turbine Shaft, Reluctor Wheel and Piston Removal

Turbine Shaft, Reluctor Wheel and Piston Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Turbine Shaft, Reluctor Wheel And Piston
GM2552953Courtesy of GENERAL MOTORS COMPANY
Turbine Shaft, Reluctor Wheel and Piston Removal

Callout Component Name
1 Turbine Shaft Retaining Ring
Procedure 
Remove and DISCARD the retainer ring. It is not re-usable.
Special Tools 
GE 5586-A  Snap Ring Pliers or equivalent
Equivalent regional tools: Special Tools
2 Turbine Shaft
3 Reaction Carrier Hub
4 Reaction Carrier Hub Thrust Bearing