4 - 5 - 6 Clutch Piston Installation
WARNING: This page is about a different variant/trim than selected.
Courtesy of GENERAL MOTORS COMPANY 4 - 5 - 6 Clutch Piston Installation
| Callout |
Component Name |
| 1 |
4 - 5 - 6 Clutch Piston Inner Seal |
| 2 |
4 - 5 - 6 Clutch Piston Outer Seal (Large) (Rounded) |
| 3 |
4 - 5 - 6 Clutch Piston Outer Seal (Dark Blue) (Stepped) |
| 4 |
4 - 5 - 6 Clutch Piston Procedure
- DT-47805
Seal Protector prevents the piston seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT-47805
Seal Protector to ease the installation of the piston.
- DT-47951-2
Spring Compressor - 6T40/45/50 or DT-48903
Spring Compressor - 6T30 can be used as a pusher if necessary.
Special Tools
- DT-47805
Seal Protector
- DT-47951-2
Spring Compressor - 6T40/45/50
- DT-48903
Spring Compressor - 6T30
Equivalent regional tools: Special Tools |