Harsh Or Late First, Second, Third, And Fourth Shift
WARNING: This page is about a different variant/trim than selected.
| Checks |
Causes |
| Low-Reverse and 1 - 2 - 3 - 4 Clutch Housing (551) |
- Inspect for damaged or broken 1 - 2 - 3 - 4 Clutch Piston (552) and piston seals damaged, worn or leaking.
- Inspect for fatigued or binding 1 - 2 - 3 - 4 Clutch Piston Return Spring (553).
- Inspect for improper surface finish on 1 - 2 - 3 - 4 Clutch Plates (557 - 559). Refer to Clutch Plate Diagnosis .
- Inspect for broken or fatigued 1 - 2 - 3 - 4 Clutch Waved Plate (557).
- Inspect for plugged or restricted Low-Reverse and 1 - 2 - 3 - 4 Clutch Piston Housing (551) air bleed.
|
| Case Assembly (50) |
- Inspect for leaking or loose fitting Fluid Check Valve (55).
- Inspect for leaking or damaged 1 - 2 - 3 - 4 and Low-Reverse Clutch Fluid Passage Seals (67).
|