LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 6T50 (M2D) - Diagnostic Information And Procedures) >> Diagnostic Information And Procedures >> Harsh Garage Shift

Harsh Garage Shift

WARNING: This page is about a different variant/trim than selected.
Checks Causes
Input Carrier Assembly (570) Inspect for worn or stripped Output Internal Gear Splines.
Low-Reverse and 1 - 2 - 3 - 4 Clutch Housing (551)
  • Inspect for damaged or fatigued 1 - 2 - 3 - 4 Clutch Wave Plate (557) and Low and Reverse Clutch Wave Plate (547). Refer to Clutch Plate Diagnosis .
  • Inspect for stripped or sheared splines on 1 - 2 - 3 - 4 Clutch Plate (546). Refer to Clutch Plate Diagnosis .
  • Inspect for improperly positioned or plugged Low Reverse Piston (550) air bleed.
  • Inspect for correct fluid level.
Low and Reverse Clutch Assembly (OWC) (543) Inspect for stripped or sheared internal and external splines on Low and Reverse Clutch Assembly (543).