Actions Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
DTCs listed in the DTC Descriptor Category = Type B DTC - Exceptions listed below
DTC P0962 = Type A DTC
P0961, P0963
- Line Pressure Command = Maximum
- Transmission Adaptive Pressure Control = Freeze current adapt values
P0962
- Grade braking = Disabled
- High Side Driver = Disabled
- Line Pressure Command = Maximum
- Manual Shift Control = Disabled
- Mode Switch = Disabled
- Neutral Idle Mode = Disabled
- Powertrain braking = Disabled
- TCC Control = Disabled
- Transmission Adaptive Pressure Control = Freeze current adapt values
- Transmission gear allowed = Reverse & 4th Gear