Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0716
Transmission Input Speed = Decreases greater than 1350 RPM - For greater than 1 s
P0717 Condition 1
Transmission Input Speed = Less than 33 RPM - For greater than 4.5 s
Condition 2
- DTC P0722 = Test Failed
- Transmission Input Speed = Less than 1000 RPM
The above condition(s) must occur for greater than 3 s.
P07BF
Input Speed Sensor Circuit = Less than 0.25 V - For greater than 1 s
P07C0
Input Speed Sensor Circuit = Greater than 4.75 V - For greater than 1 s