Conditions for Setting the DTC

P0335 Condition 1 

The ECM does not detect a crankshaft position sensor pulse for greater than 4 s.

Condition 2 

The ECM does not detect a crankshaft position sensor pulse for greater than 0.3 s.

Condition 3 

The ECM does not detect a crankshaft position sensor pulse for 2 out of 10 engine revolutions.

P0336 Condition 1 

The ECM detects that 10 or more crankshaft resynchronizations have occurred within 10 s.

Condition 2 

The ECM does not detect the synchronization gap on the reluctor wheel for greater than 0.4 s.

Condition 3 

The ECM does not detect the synchronization gap on the reluctor wheel for 1.5 s after the starter was engaged.

Condition 4 

The ECM detects less than 51 or greater than 65 crankshaft position sensor pulses during 1 engine revolution for 8 out of 10 engine revolutions.