Conditions for Running the DTCs

WARNING: This page is about a different variant/trim than selected.

P0325 and P0330

Engine is running for 2 s or greater.
Engine speed is between 400 - 5500 RPM for 75 or more cumulative revolutions.
Engine air flow is between 20 - 2000 mg per cylinder.
The engine coolant temperature (ECT) is -40°C (-40°F) or warmer.
The intake air temperature (IAT) sensor 1 is -40°C (-40°F) or warmer.

P0327, P0328, P0332, and P0333

Engine speed is less than 8500 RPM.

The DTCs run continuously when the above conditions are met.