LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LCV) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Balancer Shaft with Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Oil Pan Replacement (Upper) - Remove
  2. Timing Chain Crankshaft Sprocket Replacement - Remove
    3. Fig 1: Balancer Shaft with Oil Pump
    GM4176256Courtesy of GENERAL MOTORS COMPANY
  3. Balancer Shaft with Oil Pump Bolt (1) - Remove
  4. Balancer Shaft with Oil Pump (2) - Remove
    5. NOTE:

    If replacing the oil pump, remove it from the balancer shaft.

  5. Remove the oil pump. Balancer Shaft with Oil Pump Disassemble
scientia non olet · About LEMON Manuals