LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LCV) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Balancer Shaft with Oil Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil pump. Balancer Shaft with Oil Pump Assemble
    2. Fig 1: Balancer Shaft with Oil Pump
    GM4176256Courtesy of GENERAL MOTORS COMPANY
  2. Balancer Shaft with Oil Pump (2) - Install
  3. Balancer Shaft with Oil Pump Bolt (1) - Loosely install
    4. Fig 2: Balancer Shaft With Oil Pump Bolt Tightening Sequence
    GM4176261Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  4. Balancer Shaft with Oil Pump Bolt- Tighten in sequence

    Tighten

    1. First pass   58 N.m (43 lb ft)
    2. Final pass   58 N.m (43 lb ft)
  5. Timing Chain Crankshaft Sprocket Replacement - Install
  6. Oil Pan Replacement (Upper) - Install
scientia non olet · About LEMON Manuals