Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN 50792 Flywheel Holding Tool
EN-45059 Angle Meter

For equivalent regional tools Special Tools

Transmission Replacement (M5U with LF4 Engine)Transmission Replacement (M5N with LGX Engine)Transmission Replacement (M5N with LTG Engine)Transmission Replacement (M5T with LCV Engine) - Remove

Fig 1: Flywheel Holding Tool

Courtesy of GENERAL MOTORS COMPANY

To prevent crankshaft rotation, install EN 50792 holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the automatic flex plate.

Fig 2: Automatic Flex Plate Attaching Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the automatic flex plate attaching bolts (1).
Remove the automatic flex plate (2).
Remove EN 50792 holding tool.
For automatic flex plate cleaning and inspection. Automatic Transmission Flex Plate Cleaning and Inspection