Circuit/System Verification
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Verify no other DTCs are set.
- If other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no other DTCs are set
- If other DTCs are set
- Verify correct engine oil level and condition. Refer to Engine Mechanical Specifications (LF4)Engine Mechanical Specifications (LGX) .
- Engine Running, verify the scan tool Engine Oil Pressure parameter changes when commanding the Engine Oil Pressure Control Solenoid On and Off.
- If the parameter does not change
Replace the Q44 Engine Oil Pressure Control Solenoid.
- If the parameter changes
- If the parameter does not change
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Oil Pressure Diagnosis and Testing .
- If the DTC does not set
- If the DTC sets
- All OK.