Water Pump Removal (LF4)
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
EN-46104 Water Pump Pulley Holding Tool
For equivalent regional tools, refer to Special Tools (LGX)Special Tools (LF4) .
- Install the EN-46104 holding tool (1) onto the water pump pulley.
- Remove the water pump pulley bolts.
- Remove the water pump pulley.
- Remove the water pump bolts and DISCARD the bolts.
- Remove the water pump from the front cover.
- Remove and DISCARD the water pump gasket.