LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Mechanical - 3.6L (LF4 LGX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Turbocharger Wastegate Actuator Vacuum Tank Assemble >> Turbocharger Wastegate Actuator Vacuum Tubes Assemble

Turbocharger Wastegate Actuator Vacuum Tubes Assemble

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Turbocharger Wastegate Actuator Vacuum Tubes Assemble
GM4037124Courtesy of GENERAL MOTORS COMPANY
Turbocharger Wastegate Actuator Vacuum Tubes Assemble

Callout Component Name
1
CAUTION:

When installing vacuum lines to the solenoid valve, only use water or a dry insertion method to ease installation. Other types of lubrication should not be used. Lubricants other than water should not be used. Failure to use the proper method may cause damage to the solenoid valve.

Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube
2 Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube
3 Charge Air Bypass Valve Vacuum Tank Tube
4 Charge Air Bypass Valve Vacuum Tank Tube
5 Turbocharger Wastegate Actuator Vacuum Source Tube
6 Charge Air Bypass Valve Vacuum Tank Tube
7 Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube