Charge Air Cooler Inlet Air Tube Removal
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Charge Air Cooler Inlet Air Tube Removal
| Callout | Component Name |
|---|---|
| 1 | Turbocharger Wastegate Actuator Vacuum Tube |
| 2 | Charge Air Bypass Valve Assembly |
| 3 | Charge Air Cooler Inlet Air Tube Bolts |
| 4 | Charge Air Cooler Inlet Hose Air Clamps |
| 5 | Charge Air Cooler Inlet Air Hose |
| 6 |
CAUTION:
Charge Air Cooler Inlet Air Tube AssemblyProcedure Refer to Turbocharger Cleaning and Inspection If a turbocharger has failed, clean any turbocharger debris or excessive oil from the charge air cooler system before installing the new turbocharger. Failure to clean debris from the charge air cooler system will cause severe turbocharger and engine damage upon startup. |
| 7 | Charge Air Cooler Inlet Air Tube Seal
NOTE:
Discard seal, it is not reusable. |