Oil Pump Disassemble (LGX)
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Vacuum Pump Seal
NOTE:
Remove and DISCARD the seal. |
| 2 | Dowel Pin
NOTE:
This is press fit and not serviceable. |
| 3 | Oil Pump Housing Passage Seal
NOTE:
Remove and DISCARD the seal. |
| 4 | Oil Pump Housing Passage Seal
NOTE:
Remove and DISCARD the seal. |
| 5 | Oil Pump Drive Bolt |
| 6 | Oil Pump Sprocket |
| 7 | Oil Pump Suction Pipe Bolt |
| 8 | Oil Pump Suction Pipe |
| 9 | Oil Pump Suction Pipe Gasket
NOTE:
Remove and DISCARD the gasket. |
| 10 | Oil Pump Flow Control Valve Bolt |
| 11 | Oil Pump Flow Control Valve
CAUTION:
After removing the oil pump flow control valve, ensure the entire valve has been removed and there is no debris left in the oil pump bore. Failure to ensure the oil pump bore is free from debris may result in engine damage. |