Crankshaft Removal

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crankshaft Main Bearing Cap Side Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft bearing cap side bolts.
Remove the crankshaft bearing cap outer bolts.
Remove the crankshaft bearing cap inner bolts.

Fig 2: View Of Crankshaft Main Bearing Caps

Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft bearing caps using the EN J 6125-1B adapter (1) and EN 49102 remover (2).

Fig 3: View Of Crankshaft

Courtesy of GENERAL MOTORS COMPANY

Using two hands, lift the crankshaft straight up from the engine block.
Place the crankshaft in a secure place.

Fig 4: Locating Crankshaft Sprocket Drive Pin

Courtesy of GENERAL MOTORS COMPANY

Remove the crankshaft key from the nose of the crankshaft, if damaged.