LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Mechanical - 3.6L (LF4 LGX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal and Housing Removal (LF4)

Crankshaft Rear Oil Seal and Housing Removal (LF4)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Crankshaft Rear Oil Seal Housing Bolts
    GM1306175Courtesy of GENERAL MOTORS COMPANY
  1. Remove the crankshaft rear oil seal housing bolts.
    2. Fig 2: Identifying Pry Points On Edge Of The Crankshaft Rear Oil Seal Housing
    GM1492611Courtesy of GENERAL MOTORS COMPANY
  2. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  3. Use the pry points located at the edge of the crankshaft rear oil seal housing to separate the RTV sealant.
    4. Fig 3: View Of Crankshaft Rear Oil Seal Housing
    GM1306173Courtesy of GENERAL MOTORS COMPANY
  4. Remove and discard the crankshaft rear oil seal housing.
scientia non olet · About LEMON Manuals