LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Mechanical - 3.6L (LF4 LGX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Removal - Right Side (LF4)

Camshaft Removal - Right Side (LF4)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Markings On Bearing Caps
    GM1306311Courtesy of GENERAL MOTORS COMPANY
  1. Observe the markings on the bearing caps. Each bearing cap is marked in order to identify its location. The markings have the following meanings:
    • The raised feature must always be oriented toward the center of the cylinder head.
    • The I indicates the intake camshaft.
    • The E indicates the exhaust camshaft.
    • The number indicates the journal position from the front of the engine.
    2. Fig 2: View Of Camshaft Bearing Caps & Bolts
    GM946234Courtesy of GENERAL MOTORS COMPANY
  2. Remove the camshaft bearing cap bolts.
  3. Remove the camshaft bearing caps.
    4. Fig 3: Locating Camshafts
    GM946242Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    Mark the camshafts upon removal to ensure installation is in the correct position.

  4. Remove the camshafts.
scientia non olet · About LEMON Manuals