Automatic Transmission Flex Plate Removal

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN 46106 Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools (LGX)Special Tools (LF4) .

Fig 1: Flywheel Holding Fixture

Courtesy of GENERAL MOTORS COMPANY

Install the EN 46106 tool through the starter mounting hole.

Fig 2: View Of Engine Flywheel Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the flex plate bolts (1) and discard.
Remove the flex plate (2) from the crankshaft.

Fig 3: Flywheel Holding Fixture

Courtesy of GENERAL MOTORS COMPANY

Remove the EN 46106 tool.