Intake Manifold Insulator Replacement (LGX)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intake Manifold Insulator (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement (LGX) . Electrical Connector @ Manifold Absolute Pressure Sensor Disconnect - Manifold Absolute Pressure Sensor Replacement (LGX)
1	Intake Manifold Insulator Retainer
2	Intake Manifold Insulator WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.

Callout

Component Name

Preliminary Procedures

Intake Manifold Cover Replacement (LGX) .
Electrical Connector @ Manifold Absolute Pressure Sensor Disconnect - Manifold Absolute Pressure Sensor Replacement (LGX)

Intake Manifold Insulator Retainer

Intake Manifold Insulator

WARNING:

The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.