Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Secondary Timing Drive Chain @ Right Side Remove - Secondary Camshaft Intermediate Drive Chain Replacement - Right Side (LF4)
- Fuel Feed Front Pipe Remove - Fuel Feed Front Pipe Replacement
- Fuel Feed Intermediate Pipe Remove - Fuel Feed Intermediate Pipe Replacement (LF4)
- Turbocharger @ Bank 1 Remove - Turbocharger Replacement (Bank 1) Turbocharger Replacement (Bank 2)
- Radiator Outlet Pipe Bracket Bolt @ Cylinder Head Assembly- Remove
- Cylinder Head Bolt - Remove and DISCARD
- Cylinder Head Assembly - Remove
- Remove Ground wire and harness and position aside.
- Cylinder Head Gasket - Remove and DISCARD
- Clean and inspect the cylinder head and the engine block sealing surfaces. Refer to Cylinder Head Cleaning and Inspection , and Engine Block Cleaning and Inspection .
- Disassemble the cylinder head as necessary. Refer to Cylinder Head Disassemble (LF4) .