LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Engine Mechanical - 3.6L (LF4 LGX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Camshaft Cover Replacement - Left Side (LGX) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Housing Cover Insulator - Left Side
    GM4122656Courtesy of GENERAL MOTORS COMPANY
  1. Camshaft Housing Cover Insulator @ Left Side - Remove - Camshaft Housing Cover Insulator Replacement - Left Side 
  2. Positive Crankcase Ventilation Tube @ Camshaft Cover Disconnect
  3. Ignition Coil @ Bank 2 Remove - Ignition Coil Replacement - Bank 2 (LGX)
  4. Camshaft Position Actuator Solenoid Valve Solenoid - Bank 2 (Left Side) Exhaust Remove - Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Exhaust (LGX)
  5. Camshaft Position Actuator Solenoid Valve Solenoid - Bank 2 (Left Side) Intake Remove - Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Intake (LGX)
  6. Disconnect and remove the engine harness from the camshaft cover.
    7. Fig 2: Camshaft Cover, Bolt, Seal
    GM4122254Courtesy of GENERAL MOTORS COMPANY
  7. Camshaft Cover Bolt- Remove
  8. Camshaft Cover - Remove
  9. Camshaft Cover Seal- Remove and DISCARD
  10. Disassemble the camshaft cover as needed. Camshaft Cover Disassemble (LGX) .
  11. Clean the mating surfaces of the cylinder head and the camshaft cover. Camshaft Cover Cleaning and Inspection (LGX)
scientia non olet · About LEMON Manuals