LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Manual Transmission - TREMEC 6-Speed (Mg9 M3L)) >> Repair Instructions - On Vehicle >> Shift Fork Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shift control assembly from the vehicle. Shift Control Assembly Replacement (M3L) Shift Control Assembly Replacement (MG9) .
    2. Fig 1: Gear Position Sensor
    GM4044865Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the gear position sensor electrical connector (1).
  3. Remove the four gear position sensor retainers (2).
    4. NOTE:

    Do Not remove component (4) from the mounting plate (3). These components are serviced as a assembly.

  4. Remove the gear position sensor assembly (3) from the transmission.
scientia non olet · About LEMON Manuals