LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Manual Transmission - TREMEC 6-Speed (Mg9 M3L)) >> Repair Instructions - On Vehicle >> Shift Fork Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Gear Position Sensor
    GM4044865Courtesy of GENERAL MOTORS COMPANY
  1. Position the gear position sensor assembly (3) to the transmission.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the four gear position sensor retainers (2) and tighten to 10 N.m (89 lb in).
  3. Connect the gear position sensor electrical connector (1).
  4. Install the shift control assembly to the vehicle. Shift Control Assembly Replacement (M3L) Shift Control Assembly Replacement (MG9) .
  5. Perform the gear position sensor learn procedure. Gear Position Sensor Learn 
scientia non olet · About LEMON Manuals