LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Manual Transmission - TREMEC 6-Speed (Mg9 M3L)) >> Repair Instructions - Off Vehicle >> Shimming Procedures (M3L) >> Notes

Shimming Procedures (M3L): Notes

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools 

J 8001  Dial Indicator Set

For equivalent regional tools, refer to Special Tools .

NOTE:

The shimming procedure is required to be performed during service only when the following parts are replaced:

  • The input shaft
  • The counter gear
  • The main shaft
  • The adapter plate
  • The main housing
  • The extension housing