Counter Gear Shaft Assemble (MG9)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

J 38205-1 Press Tube

For equivalent regional tools, refer to Special Tools .

Fig 1: Installing Large Tapered Bearing

Courtesy of GENERAL MOTORS COMPANY

Install a NEW countershaft rear bearing, using the J 38205-1 press tube (1) and a rubber mallet.

Fig 2: View Of Small Tapered Bearing & Special Tool

Courtesy of GENERAL MOTORS COMPANY

Install a NEW countershaft front bearing, using the J 38205-1 press tube and a hydraulic press.