Conditions for Setting the DTC

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

P0729

ECM detects the measured gear ratio indicates 6th gear but the gear position sensor does not indicate 6th gear for 1 s.

P0731

ECM detects the measured gear ratio indicates 1st gear but the gear position sensor does not indicate 1st gear for 1 s.

P0732

ECM detects the measured gear ratio indicates 2nd gear but the gear position sensor does not indicate 2nd gear for 1 s.

P0733

ECM detects the measured gear ratio indicates 3rd gear but the gear position sensor does not indicate 3rd gear for 1 s.

P0734

ECM detects the measured gear ratio indicates 4th gear but the gear position sensor does not indicate 4th gear for 1 s.

P0735

ECM detects the measured gear ratio indicates 5th gear but the gear position sensor does not indicate 5th gear for 1 s.