Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277, P0279, P0280, P0282, P0283, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0502, P0503, P0806, P0807, P0808, P080A, P1248, P1249, P124A, P124B, P124C, P124D, P124E, P124F, P18C4, P18C5, P18C6, P18C7, P2147, P2148, P2150, P2151, P2153, P2154, P2156, P2157, P216B, P216C, P216E, P216F, P217B, P217C, P217E, P217F, or P2771 is not set.
Ignition voltage is between 9-32 V.
Throttle position is 8 % or greater.
Engine torque is 50 N.m (37 lb ft) or greater
Gear position sensor learn status is Learned
Clutch pedal is released
Transmission output speed is 120 RPM or greater
The above conditions are met for 1.5 s.