Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Stabilizer Shaft - Remove - Stabilizer Shaft Replacement

Fig 1: Stabilizer Shaft And Stabilizer Shaft Insulator Clamp In Vice

Courtesy of GENERAL MOTORS COMPANY

Remove the rear stabilizer shaft insulator clamp (1) from the stabilizer shaft insulator (2).

Fig 2: Reference Mark On Stabilizer Shaft

Courtesy of GENERAL MOTORS COMPANY

Paint a reference mark (1) on the stabilizer shaft (2) next to the stabilizer shaft insulator.

Fig 3: Stabilizer Shaft Insulator And Stabilizer Shaft

Courtesy of GENERAL MOTORS COMPANY

Remove the stabilizer shaft insulator (1) from the stabilizer shaft (2).