LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheel Stud
    GM2812183Courtesy of GENERAL MOTORS COMPANY
  1. Position the NEW wheel stud (2) in the flange of the hub assembly (1).
    2. Fig 2: Wheel Nut & Stud
    GM2812121Courtesy of GENERAL MOTORS COMPANY
  2. Install flat washers and an OLD wheel nut (2) on the wheel stud (1).
  3. Use a suitable tool to prevent the flange on the hub assembly from rotating.
  4. Tighten the wheel nut until the wheel stud is firmly seated.
  5. Remove the wheel nut and flat washers.
  6. Front Brake Rotor Replacement (JE5)Front Brake Rotor Replacement (J55)Front Brake Rotor Replacement (J6G) - Install
scientia non olet · About LEMON Manuals