Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Front Stabilizer Shaft Link - Install
- Front Stabilizer Shaft Link Nut - Install and tighten 100 N.m (74 lb ft)
- Front Stabilizer Shaft Link Nut - Install and tighten 100 N.m (74 lb ft)
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (V-Series October 4th 2015 and Earlier)Tire and Wheel Removal and Installation (V-Series October 5th 2015 and Later)