LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Wheel Drive Shafts) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Front Wheel Drive Shaft Nut 250 N.m 184 lb ft
Torque Prevailing Rear Wheel Drive Shaft Nut
(Requires a NEW nut) 
250 N.m 184 lb ft
Rear Wheel Drive Shaft to Drive Flange Bolt
(Requires a NEW bolt) 
First Pass 50 N.m 37 lb ft
Final Pass 45 degrees
Differential Carrier Side Cover Bolts 54 N.m 40 lb ft