LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LCV) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Cover Removal (LTG)

Camshaft Cover Removal (LTG)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Coolant Air Bleed Pipe
    GM4182710Courtesy of GENERAL MOTORS COMPANY
  1. Remove the engine coolant air bleed pipe bolt (1).
  2. Remove the engine coolant air bleed pipe (2), hose (3), and O-ring (4). Inspect O-ring and discard if necessary.
  3. Fig 2: Oil Level Indicator
    GM4182715Courtesy of GENERAL MOTORS COMPANY
  4. Remove the oil level indicator (3). Inspect and replace the oil indicator O-ring seals (4), if necessary.
  5. Remove the camshaft cover heat shield (2) and bolts (1).
  6. Fig 3: Rear Lift Bracket
    GM3962781Courtesy of GENERAL MOTORS COMPANY
  7. Remove the rear lift bracket (1) and bolts (2).
  8. Fig 4: Front Lift Bracket
    GM2726742Courtesy of GENERAL MOTORS COMPANY
  9. Remove the front lift bracket (2) and bolts (1).
  10. Fig 5: Ignition Coils
    GM4182716Courtesy of GENERAL MOTORS COMPANY
  11. Remove the ignition coils (2) and bolts (1).
  12. Fig 6: Camshaft Position Actuator Solenoid
    GM4182717Courtesy of GENERAL MOTORS COMPANY
  13. Remove the camshaft position actuator solenoid valves (2) and bolts (1).
  14. Fig 7: Vacuum Assembly And Bolts
    GM2726747Courtesy of GENERAL MOTORS COMPANY
  15. Remove the vacuum assembly (2) and bolts (1).
  16. Remove the vacuum assembly gasket (3) and discard.
  17. Fig 8: Camshaft Cover
    GM4182718Courtesy of GENERAL MOTORS COMPANY
  18. Remove the camshaft cover assembly (2) and bolts (1, 3).
  19. Remove and discard the camshaft cover gasket (4).