LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Disc Brake System) >> Repair Instructions >> Rear Brake Caliper Replacement (J6G) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

  1. Rear Disc Brake Pads Replacement (J6G)  - Remove
    2. Fig 1: Brake Hose Fitting Bolt
    GM4007415Courtesy of GENERAL MOTORS COMPANY
  2. Brake Hose Fitting Bolt - Remove
    3. Fig 2: Brake Hose Fitting Gasket And Rear Brake Hose
    GM4007422Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not reuse the brake hose fitting gaskets.

  3. Brake Hose Fitting Gasket <p01><p01>@Brake Hose Fitting - Remove and DISCARD
  4. Cap the brake hose fitting to prevent brake fluid loss and contamination.
    5. Fig 3: Brake Caliper Bolt
    GM4004081Courtesy of GENERAL MOTORS COMPANY
  5. Brake Caliper Bolt - Remove
    6. Fig 4: Brake Caliper Assembly
    GM4004083Courtesy of GENERAL MOTORS COMPANY
  6. Brake Caliper - Remove
scientia non olet · About LEMON Manuals