LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Disc Brake System) >> Repair Instructions >> Rear Brake Caliper Hardware Replacement (J6G) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series)
  2. Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series October 4th 2015 and Earlier)Tire and Wheel Removal and Installation (V-Series October 5th 2015 and Later) - Remove
  3. Fig 1: Brake Pad Guide Pin
    GM4004071Courtesy of GENERAL MOTORS COMPANY
  4. Brake Pad Guide Pin - Remove
  5. Fig 2: Disc Brake Pad Spring
    GM4004074Courtesy of GENERAL MOTORS COMPANY
  6. Disc Brake Pad Spring - Remove